Yamaha HTR-5940 owner manual Recording

RECORDING

Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components.

Notes

•When this unit is set to the standby mode, you cannot record between other components connected to this unit.

•The setting of the TONE CONTROL (see page 31), VOLUME, the speaker level (see page 79) and the sound field programs (see page 62) do not affect recorded material.

•The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.

•S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an S-video or a composite video signal on your VCR.

•Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording.

•A given input source is not output on the same OUT (REC) channel.

•Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.

•The XM Satellite Radio (U.S.A. model only) signals cannot be output at the AUDIO OUT (REC) jacks.

y

Do a test recording before you start an actual recording.

If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.

				(U.S.A. model)	1 Turn on all the connected components.
				VOLUME	2 Rotate the INPUT selector on the front panel
STANDBY					(or press one of the input selector buttons on
/ON
	PRESET/TUNING	FM/AM	A/B/C/D/El PRESET/TUNING/CH h MEMORY	TUNING MODE
			INPUT		the remote control) to select the source
PHONESSPEAKERS	STRAIGHT	l	PROGRAM h	VIDEO AUX	component you want to record from.
AB			INPUT MODE	MULTI CH
SILENT CINEMA				VIDEO L AUDIO R PORTABLE
				INPUT
	TONE CONTROL	BASS/TREBLE
					MD	SLEEP

OPERATION BASIC

2

CODE SETTRANSMIT

	POWER	POWER	STANDBY	POWER
	TV	AV
		MD		SLEEP
2	CD	CD-R	XM
		CBL		MULTI CH IN
	DVD	DTV	TUNER

V-AUX DVR

AMP

SOURCE

TV VOL TV CH VOLUME

TV

(U.S.A. model)

INPUT

	CD	CD-R	XM
		CBL	MULTI CH IN
or	DVD	DTV	TUNER
	V-AUX	DVR
Front panel		Remote control

3Start playback on the selected source component or select a broadcast station.

4Start recording on the recording component.

43