Yamaha HTR-5940 Displaying the input source information, Enjoying pure hi-fi stereo sound

USING OTHER FEATURES

Enjoying pure hi-fi stereo sound

The “DIRECT STEREO” mode allows sources to bypass the decoders and DSP processors of this unit so that you can enjoy pure hi-fi sound from 2-channel PCM and analog sources.

Set the component selector switch to AMP and then press DIRECT ST. on the remote control to select “DIRECT STEREO”.

AMP

DIRECT ST.

Displaying the input source information

You can display the format, sampling frequency, channel, bit rate, and flag data of the current input signal.

1Press one of the input selector buttons to select the desired input source.

MDSLEEP

CD CD-R XM

CBL MULTI CH IN

SOURCE

TV

8

DVD DTV TUNER

V-AUX DVR

DIRECT STEREO

Notes

•To avoid unexpected noise, do not play CDs encoded in DTS when the “DIRECT STEREO” mode is selected.

•When multi-channel signals (Dolby Digital and DTS) are input, this unit automatically switches to the corresponding analog input. When “DTS” is selected as the input mode (see page 33), no sound will be output.

•No sound will be output from the subwoofer.

•“TONE CONTROL” (see page 31) and “SOUND MENU” (see page 78) settings (except for speaker level settings) are not effective.

•The front panel display automatically dims.

y

You can also select the “DIRECT STEREO” mode by pressing the PROGRAM l / h buttons on the front panel repeatedly.

2Set the component selector switch to AMP and then press STRAIGHT on the remote

control to select “STRAIGHT”.

“

AMP

STRAIGHT

SOURCE

ENT.

TV

EFFECT

STRAIGHT

3Press u / d to display the information about the input signal.

PRESET/CH

ENTER

A-E/CAT.A-E/CAT.

38