Yamaha HTR-5940 owner manual Removing the front cover, Main/rear/rear center for NS-P436 Center

Mounting the main/rear speakers (and rear center speaker for NS-P436) by using commercially available speaker stands or brackets

You can also use the screw holes on the bottom of the speaker for installing the speakers on commericially available speaker stands (if you do not use the attached mounting brackets.)

A screw with a diameter of 4 mm can be used.

(Hole depth : 10 mm)

60 mm

Using the Yamaha Speaker Stand SPS-10MM (option)

By using the Yamaha Speaker Stand SPS-10MM, speakers can be placed on the floor. (Two stands make a set.)

SPS-10MM

* The SPS-10MM is not available in some areas.

Removing the front cover

Main/rear/rear center (for NS-P436)

Center

The front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the four holes on the inner surface of the cover with the four corresponding pegs on the speaker and push gently.

Note

When the cover is removed, be sure not to touch the speaker units with your hands or to exert excessive force with tools.

E-6