2 • 4 Loading Cards

To help you load, print, and collect cards, the P520 has the following items:

A - CARD FEEDER

This items is used for loading cards.

1 • Open Card Feeder Cover by putting your fingers on both sides and rotating the cover in a clockwise direction to the open position.

2 • Install cards into Feeder* as shown.

3 • Close Card Feeder Cover.

DO NOT bend cards or touch print surfaces as this can reduce print quality. The surface of the cards must remain clean and dust free. Always store cards in an enclosed container. Ideally, use cards as soon as possible. If cards stick together, carefully shuffle them.

* See Chapter 6, Technical Specifications, for card requirements and capacities.

OPERATION 9

Page 16
Image 16
Zebra Technologies P520 user manual Loading Cards, Card Feeder