Zebra Technologies P520 user manual Troubleshooting, A hologram overlay is printing

SCREEN MESSAGE	MEANING	ACTION
PRINTING BLACK	A monochrome panel is
	being printed
PRINTING VARNISH	The overlay is printing
PRINT HOLOGRAM	A hologram overlay is printing
CLEAN PRINTER	The printer is prompting	Carry	out	the cleaning
		procedure		as detailed in
	operator maintenance
		section 4 of this manual
	The printer is prompting	Carry	out	the cleaning
CLEAN MAG HEAD		procedure		as detailed in
	operator	Appendix A of this manual
CLEANING	The printer is performing an
	internal cleaning routine
	The ribbon has not been
REMOVE RIBBON	removed while the cleaning	Remove ribbon
	operation is in progress
OUT OF RIBBON	The printer ribbon has run out	Replace printer ribbon
MECHANICAL ERROR	The printer has an error	Remove the jamed card.
		Ensure the card is not
	moving the card internally
		out of specification
OUT OF CARD		Add more cards or adjust
	The card feeder is empty	the card feeder to accept
		the cards
ROTATION ERROR	The printer has an error	Remove card
	moving the card in the flip
COVER OPEN	The cover is open	Close the cover
HEAD OPEN	The print head is not locked	Lock	the print head		in its
	into position	lower position
	The data being sent from the	Check that the data is sui-
COMMAND ERROR		table	for	printing. Try
	host is not recognised
		reprinting		a card	from
		known “good” data
PARAMETERS ERROR	The features of the card are	Check the windows driver
	not recognised	options and printer type
ENCODING ERROR	Data cannot be written or read	Check that the cards are
	from the card’s magnetic stri-	loaded with the magnetic
	pe	stripe in the correct orien-
	Data cannot be read from the	tation. Check whether high
	card’s magnetic stripe	or low coercivity			cards
	The reject box is full	have been specified. Check
	The printer cannot detect a	that the data conforms to
	magnetic stripe on the card	ISO	specifications.		See
		Appendix A of this manual
		for further information.

32 TROUBLESHOOTING