Zebra Technologies P520 Appendix C, Ribbons For Printing And Lamination, Printing Station

RIBBONS FOR PRINTING AND LAMINATION:

PRINTING STATION		compatibility LAMINATOR STATION
Part Number	Description	Patch 1 mil	Patch 0.6 mil	Full Overlay
		-012 to -017	-135 to -138	-125 & -131
800015-101 to 109	Monochrome Ribbon	no	yes	yes ‡
800015-140	YMCKO	no*	no*	yes
800015-145	YMCK	yes	yes	no
800015-148	YMCKOK	no*	no*	yes
800015-150	Kdye-0	no*	no*	yes
800015-160	KO	no*	no*	yes
800015-170	YMC	yes	yes	no
800015-180	YMCKK	yes	yes	no
800015-301 to 309	Monochrome Ribbon	no	yes	yes ‡
800015-340	YMCKO	no*	no*	yes
800015-345	YMCK	yes	yes	no
800015-348	YMCKOK	no	no	yes
800015-350	Kdye-0	no*	no*	yes
800015-360	KO	no*	no*	yes

NOTE: * These ribbons can possibly be used without using the “O”-Panel.

‡These ribbons can only be used with the full overlay Part Number 800015-125 and not with the 800015-131.

Only 30 mil cards should be used when the card is to be laminated.

Use 30 mil composite cards whenever possible to ensure compliance of the finished card to ISO flatness guidelines.

APPENDIX C 49