B • About the Laminator Station
SCREEN MESSAGE | MEANING | ACTION | |
|
|
| |
INITIALISING | The printer is performing | Wait for the ready message | |
an internal test before use | |||
|
| ||
READY | Ready for use |
| |
|
|
| |
COVER OPEN | The cover is open | Close cover | |
|
|
| |
ROTATION ERROR | The printer has an error | Remove card | |
moving the card in the flip | |||
|
| ||
LAMINATING | The printer is processing a | Wait for the laminated card | |
| lamination |
| |
OUT OF RIBBON | The printer ribbon has run | Load a new ribbon | |
out | |||
|
| ||
| the printer has an error | Remove the jamed card. | |
MECHANICAL ERR | moving the card internally | Ensure the card is not out of | |
|
| specification. | |
TEMPERATURE ERR | The printer has detected a | Proceed an initialization by | |
temperature error | switching Off and On. | ||
| |||
| A lamination command has | Wait until the printer has | |
WARMING UP | been sent and the tempera- | ||
ture has not reached +/- 7°C | reached the recommended | ||
| of the recommended temp. | temperature | |
|
|
| |
| The film is glud to the card | Open laminator bracket. | |
RIBBON FAILURE | during the cool down | Remove card. | |
| period. | Close laminator bracket. | |
|
| ||
STANDBY MODE | Laminator power reduced. |
| |
|
|
|
TROUBLESHOOTING