A • MEDIA LOADING ORIENTATION
Position the cards with the Smart Card Chip at the top of the card and towards the printer.
B • SMART CARD CONTACT STATION INTERFACE
When a command to the parallel printer interface sends a card to the Smart Card Contact Station, the printer connects the Smart Card Contact Station to the female
DB - 9 | SMART CARD | DB - 9 | SMART CARD | |
PINS | CONTACT POINTS | PINS | CONTACT POINTS | |
|
|
|
| |
1 | CI (VCC) | 6 | C6 (Vpp) | |
|
|
|
| |
2 | C2 (Reset) | 7 | C7 (I/O) | |
|
|
|
| |
3 | C3 (Clock) | 8 | C8 (RFU) | |
|
|
|
| |
4 | C4 (RFU) |
|
| |
|
| 9 | (GND when chip is at station) | |
5 | C5 (GND) | |||
|
| |||
|
|
|
|
Refer to the Card printer programmer’s Manual for complete programming information.
DO NOT position printing over the Smart Card Chip.
