Zebra Technologies TLP 3844-Z manual Media Specifications, Ribbon Specifications for TLP model

Media Specifications

Width	1 to 4.25 inches / 25.4 to 108 millimeters)
Length	0.5 to 39 inches / 13 to 559 millimeters with standard memory
Gap	0.08 to 0.16 inch (2.0 to 4.0 millimeters)
	0.118 inch / 3.0 millimeters recommended
Thickness	0.003 to 0.007 inch / 0.08 to 0.18 millimeter
Roll Size	Maximum outer diameter: 5 inches (127 millimeters)
	Inner Core diameters: 1 or 1.5 inches (25.4 or 38 millimeters)
	Optional media hangers available for larger inner core
	diameters
Requirements	✔ User Zebra-brand direct thermal or thermal transfer media
	that is outside wound. Media may be reflective (black mark)
	sensing or transmissive sensing, die-cut, notched, or
	continuous)
	✔ For die-cut labels, use only full auto dies.
	✔ Notched media must have a 0.5 inch (13 mm) wide by 0.094
	inch (2.5 mm) long cutout located in the center of the roll.
	✔ The reflective media black marks must be located in the
	center of the roll. Mark width 0.5 inch (13 mm) centered and
	perpendicular to the edge of the media; mark length 0.094
	inch (2.4 mm) parallel to the bottom edge of the media.

Always thoroughly test your desired media for your specific application before buying in large quantities.

Ribbon Specifications for TLP model

Roll Size	Maximum outer diameter: 1.3 inches / 33 millimeters
Length	2,900 inches / 74 meter capacity; provides 1:1 media roll to
	ribbon ratios
Width	At least as wide as media
Setup	Ink-side out
Requirements	User Zebra-brand ribbon that is outside wound.

46 980441-001 Rev. A