Windows CE Driver
Printer Settings
Media Tracking
Media Tracking sets Continuous, Variable Length, or Mark Sensing with the default set to Variable Length. When media tracking is set to Continuous, the driver sends the full page size to the printer (Page Mode), the page length will always be the same as the selected paper size (e.g., if 58 mm x 200 mm Media is selected, the print will be 200 mm long in Page Mode). When media tracking is set to Variable Length, the driver will shorten the length of the page to the length of the printed element. The driver will end the page after the last printed element (text, barcode, or graphic) then send a feed, cut, and eject command. The page length may vary from page to page but will always be a minimum of 76 mm. When Mark Sensing is set, the driver will send the page size to the printer, the printer will restrict the print to the area between the black marks. If the printed area is larger than the space between the black marks, it will print additional pages (receipts). The margin values in the receipt application must be corrected after setting the driver values. If the margin in the application is set to 9 mm and the driver is set to 2 mm, the application setting will be enforced unless the driver is changed accordingly.
Top Margin
The Top Margin is the equivalent to the distance between the cutter and the print head and is by default 10 mm. If it is set between the minimum of 2 mm or 10 mm it will reverse the paper.
Bottom Margin
The Bottom margin can be set between 0 and 9 mm and will be added to the bottom of the page in Variable Mode and will limit the printable area in Continuous Mode and Mark Sensing. The default is 0.
Cutter Mode
Cutter Mode can be set to None, Every Page and Cut at the document end. The default is Every Page. When set to Every Page and a
13
4/14/2013 | TTP 2030™ Windows CE Software Integrator Guide |
