Zebra Technologies TTP 2100 manual Operation, Loading Fanfold Ticket Stock

4

Operation

Loading Fanfold Ticket Stock

1.Turn the tickets so that the surface to be printed (temperature sensitive side) faces upwards. Put the first ticket on the input guide and slide it up the guide into the printer.

2.The printer will feed the paper, locate the edge and reverse to printing position.

3.When ready, the yellow status led will be ON indicating that the printer is ready to be used.

Note • Remember that the thermal coating should be upwards and black-marks (if used) should face down. The printer will automatically load the tickets when the sensors detect a ticket is loaded.

Figure 18 • Loading Ticket Stock

11/04/2009 TTP 2100 Operator Guide P1021708-001