Zebra Technologies ZQ110 manual

ZQ110

GS ( F

[Name] Set black mark control functions.

[Description] ▪ This command performs various functions to control the black mark(BM)

	paper as follows:
	m	Format		Function
	2	GS ( F pL pH m a	Sets the paper feed amount to adjust the
		nL nH		paper cutting position after sensing BM.
	112	GS ( F pL pH m aL		Specifies the black mark paper format.
		aH bL bH
[Notes]	▪ This command is effective only when the BM(black mark) sensor is
	enabled.

▪This command is stored in the receive buffer and processed in FIFO so that the delay in execution of this command might be occurred.

<Function 2> GS ( F pL pH m a nL nH				(m=2)
[Format]	ASCII	GS	(		F	pL	pH	m	a	nL	nH
	Hex	1D	28		46	04	00	02	a	nL	nH
	Decimal	29	40		70	4	0	0	a	nL	nH
[Range]	(pL + pH × 256) = 4 (pL = 4, pH = 0)
	m = 2
	a = 0, 48
	0 ≤ (nL + nH × 256) ≤ 65535 (0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255)

[Default]

[Description]

nL=0, nH=0

▪This command sets the value for the adjustment of paper cutting position after sensing BM.

-pL, pH specifies (pL + pH × 256) as the number of bytes after pH (m, a, nL, and nH)

-nL, nH specifies [(nL + nH × 256) × vertical motion units] as the adjustment value.

[Notes]	▪ This command affects to the cutting operations as follows:
	- Paper cut by GS V m n.
	- Paper cut after paper feeding triggered by the paper FEED button.
	- Paper cut after initializing the BM.(optional)
	- Paper cut after paper feeding with the cover closed.(optional)
	▪ This command is only effective for the forward paper feeding.
	▪ The maximum adjustable length is 400 mm. If the adjustment value to be
	specified exceeds the maximum value, the adjustment value is
	automatically set to the maximum value.

Rev. 1.00 - 38 - Mobile Printer Command Manual