Zebra Technologies ZQ110 manual Function 181 GS k pL pH cn fn m Fn=81 Format

									ZQ110
<Function 181> GS ( k pL pH cn fn m			(fn=81)
[Format]	ASCII	GS	(	k	pL	pH	cn	fn		m
	Hex	1D	28	6B	03	00	31	51		m
	Decimal	29	40	107	3	0	49	81		m
[Range]	(pL + pH x 256) = 3 (pL=3, pH=0)
	cn=49
	fn=81
	m=48

[Description]

[Notes]

Encodes and prints QR CODE symbol data saved in the storage area

▪This function is used in regular mode when the printer is at the first line or no data is present in the printer buffer.

▪If the size of any one symbol is larger than the print area, printing cannot be done:

▪If any of the following errors is present in the symbol storage area, printing cannot be done.

-There is no data. (Function 180 cannot be executed)

-If [(number of columns x number of rows) < number of code words], the numbers of columns and rows are automatically processed.

-The four types of data compression mode are as follows:

*Numeric Data Code *Alphanumeric Data mode *Kanji Data mode

*8 bit Data mode

Note: According to the symbol data in the data storage area, automatic conversion to optimal compression is done.

▪The following data is automatically added during encoding: - Position sensor pattern

- Segregator for the position sensor pattern - Timing pattern

- Format information - Version information

- Error correction code text - Pad code text

- Indicator for counting bits of bytes - Mode indicator

- Concluder

- Queue pattern (when model 2 is selected)

- Expansion pattern (when model 1 is selected)

▪During symbol printing, the printer mode has no effect (bold, underline, reverse direction, contrast).

▪In regular mode, this command supplies enough paper required for symbol printing. If the paper supply is not sufficient, the paper supply command is executed. When printing, the printing position is to the left of the print area. After symbol printing, the printer returns to the start position of the line, and the buffer is emptied.

Rev. 1.00 - 48 - Mobile Printer Command Manual