Zebra Technologies ZQ110 manual Esc =, Esc @, Esc D, Nul

ZQ110

ESC =

[Name]	Select peripheral device
[Format]
	ASCII	ESC	=	n
	Hex	1B	3D	n
	Decimal	27	61	n
[Range]	1 ≤ n ≤ 3
[Default]	n = 1
[Description]	▪ The selection of peripherals according to the n value is as follows.

n

1,3

2

Function

Printer Activation

Printer Deactivation

ESC @

[Name]	Initialize printer.
[Format]
	ASCII	ESC	@
	Hex	1B	40
	Decimal	27	64
[Range]	32 ≤ n ≤ 126
[Description]	▪ Clears the data in the print buffer and resets the printer mode to the mode
	that was in effect when the power was turned on.

ESC D

[Name]	Set horizontal tab positions.
[Format]
	ASCII	ESC	D	n1...nk	NUL
	H x	1B	44	n1...nk	00
	Decimal	27	68	n1...nk	0
[Range]	1 ≤ n ≤ 255 , 0 ≤ k ≤ 32
[Default]	n=8, 16, 24, 32, 40,....., 232, 240, 248
	(for font A in a standard character size width)
[Description]	▪ Sets horizontal tab positions.

-n specifies the number of digits from the setting position to the left margin or the beginning of the line.

-k specifies the number of bytes set for the horizontal tab position.

▪The horizontal tab position is stored as a value of [character width x n] measured form the beginning of the line.

Rev. 1.00 - 20 - Mobile Printer Command Manual