Zebra Technologies ZQ110 manual Function 112 GS F pL pH m aL aH bL bH =112 Format

ZQ110

<Function 112> GS ( F pL pH m aL aH bL bH					(m=112)
[Format]	ASCII	GS	(	F	pL	pH	m	aL	aH	bL	bH
	Hex	1D	28	46	05	00	70	aL	aH	bL	bH
	Decimal	29	40	70	5	0	223	aL	aH	bL	bH
[Range]	(pL + pH × 256) = 5 (pL = 5, pH = 0)
	m = 112
	0 ≤ (aL + aH × 256) ≤ 65535 (0 ≤ aL ≤ 255, 0 ≤ aH ≤ 255)
	0 ≤ (bL + bH × 256) ≤ 65535 (0 ≤ bL ≤ 255, 0 ≤ bH ≤ 255)
[Default]	aL = 141, aH = 0 (BM height(top of a BM ~ bottom of BM): 20 mm)
	bL = 20, bH = 11 (BM interval(top of a BM ~ top of next BM): 400 mm)
[Description]	▪ This command sets the black mark paper format.

-pL, pH specifies (pL + pH × 256) as the number of bytes after pH (m, aL, aH,bL, bH).

-aL, aH specifies [(aL + aH × 256) × vertical motion units] as the BM height.

-bL, bH specifies as [(bL + bH × 256) × vertical motion units] as the BM interval.

[Notes]	▪ The available BM height ranges from 4 to 20 mm.
	▪ If the BM height specified is out of range, this command is ignored.
	▪ The BM interval ranges from 40 to 400 mm.
	▪ If the BM interval specified is out of range, this command is ignored.

Rev. 1.00 - 39 - Mobile Printer Command Manual