Zebra Technologies ZQ110 manual CODE39, ITF, Codabar

								ZQ110
GS v 0
[Name]	Print raster bit image.
[Format]
	ASCII	GS	v	0	m	xL	xH	yL yH d1...dk
	Hex	1D	76	30	m	xL	xH	yL yH d1...dk
	Decimal	29	118	48	m	xL	xH	yL yH d1...dk

[Range]	0 ≤ m ≤ 3, 48 ≤ m ≤ 51
	1	≤ (xL + xH x 256)	≤ 128	(0 ≤ xL ≤ 128, xh=0)
	1	≤ (yL + yH x 256)	≤ 4095	(0 ≤ yL ≤ 255, 0 ≤ yH ≤ 15)
	0	≤ d ≤ 255
	k = (xL + xH x 256) x (yL + yH x 256)
[Description]	▪ Prints a raster bit image in m mode.

- m specifies the bit image mode.

m	Mode	Vertical dot density	Horizontal dot density
0, 48	Normal	203 dpi	203 dpi
1, 49	Double-width	203 dpi	203/2 dpi
2, 50	Double-height	203/2 dpi	203 dpi
3, 51	Quadruple	203/2 dpi	203/2 dpi

dpi : dots per 25.4mm {1"}

-xL, xH specifies (xL + xH x 256) byte(s) in the horizontal direction for the bit image.

-yL, yH specifies (yL + yH x 256) dot(s) in the vertical direction for the bit image.

-d specifies the definition data of the bit image data.

GS w

[Name]	Set bar code width.
[Format]
	ASCII	GS	w	n
	Hex	1D	77	n
	Decimal	29	119	n

[Range]

[Description]

2 ≤ n ≤ 6 , n=3

▪Set the horizontal size of the bar code, using n as follows:

	n		Multi-level Bar Code		Binary-level Bar Code
					Thin element width		Thick element width
			Module Width (mm)
					(mm)		(mm)
2		0.250		0.250		0.625
3		0.375		0.375		1.000
4		0.500		0.500		1.250
5		0.625		0.625		1.625
6		0.750		0.750		2.000

[Notes]	▪ Multi-level bar codes are as follows:
	- UPC-A, UPC-E, JAN13, JAN8, CODE93, CODE128
	▪ Binary-level bar codes are as follows:
	- CODE39, ITF, CODABAR

Rev. 1.00 - 86 - Mobile Printer Command Manual