Zebra Technologies ZQ110 manual Reference for requesting Waln configuration

ZQ110

▪Reference for requesting WALN configuration

Operation	Message Value	Size	Remark
Connect Request	System Request	unsigned char[18]
	CMD("__[I_F]__[SYS_REQ]")
(Host → Printer)
	Check sum	unsigned char[2]
	Search Request	unsigned char[18]
	CMD("__[I_F]__[SYS_RSP]")
Connect Request	Firmware version	unsigned char[16]
(Printer → Host)	Update date	unsigned char[32]
	MAC Address	unsigned char[6]
	Check sum	unsigned char[2]
Configuration Get Value	Configuration Get Value	unsigned char[18]	Header
	CMD("__[I_F]__[IF__GET]")
(Host → Printer)
	Check sum	unsigned char[2]
	Configuration Current Value	unsigned char[18]
	CMD("__[I_F]__[IF__CUR]")
	SystemName	unsigned char[64]
	Region	unsigned char
	NetworkMode	unsigned char	Infratructure(0)
			Adhoc(1)
	IpConfigMode	unsigned char	DHCP(0)
			Manual(1)
	IP Address	unsigned char[4]
	SubNetMask	unsigned char[4]
	Gateway	unsigned char[4]
Configuration Current Value
	SSID	unsigned char[32]	ESSID
(Printer → Host)
			0:Open
			1:Shared
	AUTH Mode	unsigned char	2:WPA1PSK
			3:WPA2PSK
			4:WPA1EAP
			5:WPA2EAP
			0:none
	Crypto Mode	unsigned char	1:WEP64/128
			2:TKIP
			3:AES
	WEP Key_0	unsigned char[26]
	WEP Key_1	unsigned char[26]

Rev. 1.00 - 94 - Mobile Printer Command Manual