Zebra Technologies ZQ110 manual Function 567 GS k pL pH cn fn n Fn=67 Format

									ZQ110
<Function 567> GS ( k pL pH cn fn n			(fn=67)
[Format]	ASCII	GS	(	k	pL	pH	cn	fn		n
	Hex	1D	28	6B	03	00	35	43		n
	Decimal	29	40	107	3	0	53	67		n
[Range]	(pL + pH x 256) = 3 (pL=3, pH=0)
	cn=53
	fn=67
	0<=n<=2
[Default]	n=0
[Description]	Set the mode of .the Aztec barcode module.
[Notes]	▪ n=0 : data mode, n=1 : gs1 mode, n=2 : unicode mode.

▪In gs1 mode, Extended ASCII characters and control characters are not suppored.

▪In gs1 mode, data should start with an AI.

▪In unicode mode, only latin-1 characters are supported.

▪The setting of this command affects <Function 580> and <Function 581>

▪The setting of this command remains effective until Esc @, printer reset or power cycling is executed.

<Function 580> GS ( k pL pH cn fn m d1…dk					(fn=80)
[Format]	ASCII	GS	(	k	pL	pH	cn	fn	m	d1...dk
	Hex	1D	28	6B	pL	pH	35	50	30	d1...dk
	Decimal	29	40	107	pL	pH	53	80	48	d1...dk
[Range]	0<=(pL + pH x 256)<=3803 (0<=pL<=256, 0<=pH<=14)
	cn=53
	fn=80
	m=48
	0<=d<=255
	k = (pL + pH x 256) – 3
[Default]	none
[Description]	Store Aztec barcode symbol data in the symbol storage area.
[Notes]	▪ The data stored to the symbol storage area by this command is executed
	by Function 581. The data remains reserved in the symbol storage area.

▪Digits only : maximum capacity 3800 digits.

▪Alphanumeric text : maximum capacity 300 characters.

▪Byte values : maximum capacity 1900 bytes.

Rev. 1.00 - 57 - Mobile Printer Command Manual