Zebra Technologies ZQ110 manual Function GS E pL pH fn d1 d2 fn=1 Format

									ZQ110
<Function 1>	GS ( E pL pH fn d1 d2 (fn=1)
[Format]	ASCII	GS	(	E	pL	pH	fn	d1		d2
	Hex	1D	28	45	pL	pH	fn	d1		d2
	Decimal	29	40	69	pL	pH	fn	d1		d2
[Range]	(pL + pH x 256) = 3		(pL=3, pH=0)
	fn=1
	d1=73, d2=78

[Description]

[Notes]

This command starts the user setting mode, enabling the printer to notify that the mode has changed as follows:

[Mode change feedback]

	Hexadecimal	Decimal	Number of Data
Header	37H	55	1 byte
Flag	20H	32	1 byte
NUL	00H	0	1 byte

▪This command is effective only in standard mode, not in page mode.

▪Upon entering the user mode setting mode by this command, the printer transmits “mode change feedback” to the host.

▪The user setting mode should be enabled prior to processing <Function 2> through 12. Otherwise, those functions are ignored.

▪After confirming “mode change feedback”, it is recommended to send the command to reconfigure the NV user memory.

<Function 2> GS ( E pL pH fn d1 d2 d3 (fn=2)

[Format]

[Range]

[Description]

ASCII	GS		(	E	pL	pH	fn	d1	d2	d3
Hex	1D		28	45	pL	pH	fn	d1	d2	d3
Decimal	29		40	69	pL	pH	fn	d1	d2	d3
(pL + pH x 256)		= 4	(pL=4, pH=0)
fn=2
d1=79, d2=85, d3=84

This command terminates the user setting mode and performs a software reset.

[Notes]	▪ This command activates setting items set in the user setting mode.
	▪ All the setting items will be effective only after performing this command.
	▪ After executing a software reset, the printer resumes the setting in effect
	at power on.

Rev. 1.00 - 60 - Mobile Printer Command Manual