Zebra Technologies ZQ110 manual BS M S PL PH fn2 m d1~dk Name Set Start characters Format

									ZQ110
BS M S PL PH fn2 m d1~dk
[Name]	Set Start characters
[Format]
	ASCII	BS	M	S	pL	pH	fn2	m	d1~dk
	Hex	08	4D	53	pL	pH	32	m	d1~dk
	Decimal	08	77	83	pL	pH	50	m	d1~dk
[Range]	3 ≤ (pL+pHx256) ≤ 12
	m = 49, 50, 51 32 ≤d ≤127, k ≤ 10
[Default]	Track 1 : “START1 “
	Track 2 : “START2 “
	Track 3 : “START3 “
[Description]	▪ m defines the track to set Start characters.

▪d indicates the characters to be set as Start characters.

▪k indicates the number of characters to be used as Start characters.

▪k is defined as (PL + PH x 256) - 2

▪If Dynamic sentinel character mode is set by fn1 after setting Start characters, the Start characters are added to the beginning parts of each track data after reading card data and then the card data is transmitted.

▪The specified Start characters are saved to non-volatile memory so the setting value is not changed even though the printer is reset.

BS M S PL PH fn3 m d1~dk

[Name]	Set End characters
[Format]
	ASCII	BS	M	S	pL	pH	fn3	m	d1~dk
	Hex	08	4D	53	pL	pH	33	m	d1~dk
	Decimal	08	77	83	pL	pH	51	m	d1~dk

[Range]	3 ≤ (pL+pHx256) ≤ 12
	m = 49, 50, 51 32 ≤d ≤127, k ≤ 10
[Default]	Track 1 : “END1”
	Track 2 : “END2”
	Track 3 : “END3”

[Description] ▪ m defines the track to set an End character.

▪d indicates the character to be set as an End character.

▪k indicates the number of characters to be used as End characters.

▪k is defined as (PL + PH x 256) - 2

▪If Dynamic sentinel character mode is set by fn1 after setting End characters, the End characters are added to the end parts of each track data after reading card data and then the data is transmitted.

▪If d is set to Null 1-byte, it allows the setting of no End character.

▪The specified End characters are saved to non-volatile memory so the setting value is not changed even though the printer is reset.

Rev. 1.00 - 89 - Mobile Printer Command Manual