Zebra Technologies ZQ110 manual Name Execute macro Format

ZQ110

GS ^

[Name]	Execute macro.
[Format]
		ASCII		GS	^	r	t	m
		Hex		1D	5E	r	t	m
		Decimal		29	94	r	t	m
[Range]	0		≤ r ≤ 255
	0		≤ t ≤ 255
	m=0, 1
[Description]	▪ Executes a macro.

-r specifies the number of times to execute the macro.

-t specifies the waiting time for executing the macro.

-m specifies macro executing mode from the table below.

m Function

0Executes the macro r times at the interval specified by t. After waiting for the time specified by t, the FEED button

1must be pressed.

After the button is pressed, the macro is executed once. This operation is then repeated r times.

GS a

[Function]	Enable/Disable Automatic Status Back. (ASB)
[Code]
	ASCII	GS	a	n
	Hex	1D	61	n
	Decimal	29	97	n
[Range]	0 ≤ n ≤ 255
[Default]	n=0
[Description]	This enables or disables ASB (Automatic Status Back) according to n.
	- ASB is enabled when n > 0.
[Remarks]	▪ ASB is the function that transmit the printer status such as cover open/close
	and Online/Offline if ASB is enabled. Using this ASB function, the host can
	check to see if the printer is running properly.

▪Once ASB has been enabled, the printer transmit the current printer status When its status is changed, until ASB is disabled.

▪When n = 0, ASB is disabled. The printer stops transmitting the status.

▪The setting of this command remains effective until ESC @, printer reset or power cycling is executed.

Rev. 1.00 - 80 - Mobile Printer Command Manual