Zebra Technologies ZQ110 manual Function 381 GS k pL pH cn fn m Fn=81 Format

									ZQ110
<Function 381> GS ( k pL pH cn fn m			(fn=81)
[Format]	ASCII	GS	(	k	pL	pH	cn	fn		m
	Hex	1D	28	6B	03	00	33	51		m
	Decimal	29	40	107	3	0	51	81		m
[Range]	(pL + pH x 256) = 3 (pL=3, pH=0)
	cn=51
	fn=81
	m=48

[Description]

[Notes]

Encodes and prints DATAMATRIX symbol data saved in the storage area

▪This function is used in regular mode when the printer is at the first line or no data is present in the printer buffer.

▪If the size of any one symbol is larger than the print area, printing cannot be done.

▪If any of the following errors is present in the symbol storage area, printing cannot be done:

-There is no data. (Function 380 cannot be executed)

-The number of alphanumeric characters exceeds 2334.

-The number of 8bit byte characters exceeds 1558.

-The number of numeric characters exceeds 3116.

▪DATAMATRIX uses ECC 200 symbols.

▪In the detection and correction of errors, DATAMATRIX uses the Reed- Solomon algorithm.

▪The following data is automatically added during the encoding process:

-Position pattern

-Error correction code text

-Mode separator

-Pad code text

▪During symbol printing, the printer mode has no effect (bold, underline, reverse direction, contrast).

▪In regular mode, this command supplies enough paper required for symbol printing. If the paper supply is not sufficient, the paper supply command is executed. When printing, the printing position is to the left of the print area. After symbol printing, the printer returns to the start position of the line, and the buffer is emptied.

[Example]	▪ Input:
	0x1d 0x28 0x6b			0x03	0x00	0x33 0x43 0x05
	0x1d 0x28 0x6b			0x1b 0x00		0x33	0x50 0x30
	0x5a 0x51 0x31			0x31	0x30	0x5f 0x5a 0x65 0x62 0x72
	0x61	0x20	0x54	0x65	0x63	0x68	0x6e 0x6f 0x6c 0x6f
	0x67	0x69	0x65	0x73
	0x1d 0x28 0x6b			0x03	0x00	0x33	0x51 0x30
	0x0a

Rev. 1.00 - 51 - Mobile Printer Command Manual