Zebra Technologies ZQ110 manual Function 48 GS L pL pH m fn fn=0 Format

								ZQ110
<Function 48> GS ( L pL pH m fn (fn=0, 48)
[Format]	ASCII	GS	(	L	pL	pH	m		fn
	Hex	1D	28	4C	pL	pH	m		fn
	Decimal	29	40	76	pL	pH	m		fn

[Range]

[Description]

(pL + pH x 256) = 2 (pL=2, pH=0) m=48, fn=0, 48

Transmits the total capacity of the NV bit-image memory (number of bytes in the memory area).

	Hexadecimal	Decimal	Amount of Data
Header	37H	55	1 byte
Flag	30H	48	1 byte
Data	30H - 39H	48 - 57	1 - 8 bytes
NUL	00H	0	1 byte

▪The total capacity data is converted to character codes corresponding to decimal data, then transmitted from the MSB.

<Function 50> GS ( L pL pH fn (fn=2, 50)

[Format]	ASCII	GS	(	L	pL	pH	m	fn
	Hex	1D	28	4C	pL	pH	m	fn
	Decimal	29	40	76	pL	pH	m	fn
[Range]	(pL + pH x 256) = 2 (pL=2, pH=0)
	m=48, fn=2, 50

[Description]

[Notes]

This command prints the graphics data defined by the process of Function 112.

▪The graphics data stored in the printer buffer is printed.

▪This command is available in standard mode, not in page mode.

▪The graphics data is defined by Function 112.

▪The required amount of line feed pitch is used for printing graphics data, regardless of the existing setting value of the pitch.

Rev. 1.00 - 67 - Mobile Printer Command Manual