Zonet Technology ZSR0104C Series Run the WINIPCFG command. Figure A-34 Figure A-34, Figure A-35

Step 2. Run the WINIPCFG command. (Figure A-34)

Figure A–34

Step 3. To release the previous IP settings in your computer, choose your network interface card in the menu. Then click the Release button. (Figure A-35)

Figure A–35

Step 4. To obtain new IP settings from WPD –140, click the Renew button. As listed below, the IP address is your client computer’s LAN IP address, and the Default Gateway is ZSR0104C SERIES IP address. Make sure that your IP Address is 10.0.0.xxx, (xxx ranges from 2 to 254) your Subnet Mask is 255.0.0.0, and your Default Gateway is 192.168.1.1. These values confirm that your ZSR0104C SERIES is functioning.

(Figure A-36)

Figure A–36

Page 45