Storing and Swapping Patches
This section describes how to store an edited patch in memory, and how to swap patches in the USER group.
The 707II enters the store standby condition. The patch name and the indications "SAVE" and "SWAP" are shown alternately on the display. The [BANK/PATCH] indicator shows the bank and patch number.
STORE? E3
HINT 
4.To carry out the store or swap operation, press the [STORE/ EXECUTE] key once more.
The store or swap operation is performed, and then the unit returns to the original mode. If the patch in step 1 was being edited, the editing changes are stored.
If you press the [CANCEL/EXIT] key instead of the [STORE/EXECUTE] key, the store/swap operation is canceled and the unit returns to the original mode.
Mode) (Edit Patch a of Sound the Changing
To change the name of an edited patch, see p. 38.
2.Use the MODULE [E]/[R] keys to select either "SAVE" or "SWAP".
NOTE 
If the original patch is from the PRESET group, "SWAP" cannot be selected.
3.Use the TYPE [W]/[Q] keys or the [W]/[Q] foot switches to select the target patch for storing.
The name of the newly selected patch and the indication "STORE?" are shown alternately on the display. The bank and patch number flash on the [BANK/PATCH] indicator.
NOTE 
The PRESET group cannot be selected as store target. If you press the [STORE/EXECUTE] key while a patch from the PRESET group is selected, the selection automatically changes to "A0" in the USER group.