Manuals / Brands / Musical Instruments & Equipment / Guitar / Zoom / Musical Instruments & Equipment / Guitar

Zoom 7072 Adjusting the Expression Pedal, MAX, 9.Push the pedal fully down, 4.Press the [STORE/EXECUTE] key, 7.Press the [STORE/EXECUTE] key to store the patch

1 40

Download 40 pages, 907.06 Kb

For example, when PDLMIN is set to 4 and PDLMAX to 8, the parameter adjustment range will be limited as shown in the illustration below.

MAX=8

MIN=4

When PDLMIN is set to 7 and PDLMAX to 2, pushing the pedal decreases the parameter value, and the range is as shown below.

7.Press the [STORE/EXECUTE] key to store the patch.

The module which is assigned to the pedal will automatically be stored as ON.

8.In play mode, move the pedal while playing your guitar.

The parameter assigned to the pedal changes.

9.Push the pedal fully down.

The module which is assigned to the pedal is switched between on and off. If the pedal is assigned to the sampler, the sampler function is switched on or off.

NOTE

		If the pedal is assigned to the volume, pushing
		If the pedal is assigned to the volume, pushing
		the pedal fully down does not perform any
MIN=7		switching action.

MAX=2

Adjusting the Expression Pedal

The expression pedal is adjusted for optimum operation at the factory, but sometimes, readjustment may be necessary. If pushing the pedal fully down does not have a strong effect, or if the volume or sound changes excessively even when the pedal is only lightly pushed, adjust the pedal as follows.

1.Turn power to the 707II on while keeping the [PEDAL] key depressed.

The indication "MIN" appears on the display.

2.With the expression pedal fully raised, press the [STORE/EXECUTE] key.

The display indication changes to "MAX".

MAX

Push strongly, so that	When foot is lifted,
pedal touches here.	pedal returns slightly.

4.Press the [STORE/EXECUTE] key.

The adjustment is completed, and the unit returns to the play mode.

HINT

Functions Other

3.Push the expression pedal fully down and then lift your foot off the pedal.

The pedal goes back a little.

•The position of the pedal in step 3 determines the on/off switching point. If you want the pedal to perform on/off switching with a lighter touch, set the pedal to a somewhat higher position.

•If the indication "ERROR" appears, return to step 2 and repeat the procedure.

ZOOM 707II GUITAR 25

Contents

CONTENTS USAGE AND SAFETY PRECAUTIONS Introduction Controls and Functions Top Panel Rear Panel POWER Preparations Inserting Batteries and a SmartMedia card Getting Connected Quick Guide (Let's Play) 1In play mode, press one of the [W]/[Q] foot switches 2 To switch the effect module on or off, push the expression pedal Changing the sound of a patch 1While playing your instrument, operate the knobs on the panel WER A0 Storing an effect 1Press the [STORE/EXECUTE] key [DRIVE VARIATION] key [DRIVE] knob Parameter knob 3 Adjusts the reverb and echo level Listening to Patches (Play Mode Operation) Panel Display in Play Mode Selecting a Patch Using the Tuner Function 440HZ Using the Easy Edit Function Using the Sampler Function SAMPLE SP NO SPMODE N1 SP LVL Using the Rhythm Function POWER A0 8BEAT BPM120 LVL Rhythm pattern list Changing the Sound of a Patch (Edit Mode) Patch Configuration ZNR Basic Edit Mode Steps HALL PD TIME TONE MIX Storing and Swapping Patches STORE? E3 Other Functions Using the Hold Delay Function STOP ■If a numeric value is set as TIME parameter Effect sound Direct sound ■If TIME parameter is set to "Mn" and MODE parameter to "So Changing the Patch Call Method Using the Pedal to Control an Effect ●MOD ●GAIN ●REV ●VOL ●SAMPLER Adjusting the Expression Pedal Storing Rhythm Patterns and Samples as Part of a Patch 8.Press the [R/P] key 10.Switch the patch 11.To stop rhythm pattern playback, press the [R/P] key 12.Press the [PATCH SYNC] key so that the LED of the key is out Assigning a sample to a patch LOAD Utility mode functions Storing a single patch on a SmartMedia card 1.In play mode, select the patch from internal memory that you want to store 2.Activate utility mode and select "SAVE". Then press the [STORE/ EXECUTE] key 5.To carry out the operation, press the [STORE/EXECUTE] key once more Storing a group on a SmartMedia card 1.In utility mode, select "ALSAVE" and press the [STORE/EXECUTE] key 3.To carry out the operation, press the [STORE/EXECUTE] key once more Deleting a group from a 1.In utility mode, select "P DEL" and press the [STORE/EXECUTE] key 2.Use the TYPE [W]/[Q] keys to select the patch group (1 – 5) for deleting 3.Press the [STORE/EXECUTE] key 4.To carry out the operation, press the [STORE/EXECUTE] key once more All Initialize/Factory Recall Effect Types and Parameters BOOSTER Module ISOLATOR/COMP (Isolator/Compressor) Module DRIVE Module EQ (Equalizer) Module ZNR/D GATE (ZOOM Noise Reduction/D Gate) Module CABINET Module MODULATION Module TYPE 9 STEP 36ZOOM 707II GUITAR DLY/REV (Delay/Reverb) Module TOTAL Module Troubleshooting Specifications Patch List