Parameter 2 | FB | 0 – 10 |
Adjusts number of repeat cycles (feedback) for delay sound.
Parameter 3 | MIX | 0 – 30 |
Adjusts delay sound level.
TYPE 6 DLYHAL (Delay + Hall Reverb)
This is a combined delay and hall reverb effect.
TYPE 7 DLYROM (Delay + Room Reverb)
This is a combined delay and room reverb effect.
* Parameters for DLYHAL and DLYROM are the same.
Parameter 1 | DLYTIM | 1 – 50 |
Adjusts delay time in
Parameter 2 | DLYMIX | 0 – 15 |
Adjusts delay sound mix. |
| |
| REVMIX | 0 – 15 |
Parameter 3 | ||
Adjusts reverb sound mix. |
| |
TYPE 8 HLDDLY (Hold Delay)
This is a hold delay effect that lets you record a phrase of up to 2 seconds during a performance and play it back repeatedly.
When "Mn" (Manual) is selected and a foot switch is pressed, recording is carried out until the switch is pressed again or until 2 seconds have elapsed.
Parameter 1 | TIME | 1 – 99, 1.0 – 2.0, Mn |
Adjusts recording time from 10 ms to 990 ms in
Parameter 2 | MODE | nL, So, rS |
Selects playback mode for recorded phrase.
•nL (Normal): Normal direction playback
•So
•rS (Reverse): Reverse direction playback
Parameter 3 | MIX | 0 – 30 |
Adjusts effect sound mix.
TOTAL Module
The TOTAL module is not an independent effect module. Rather it serves to set parameters that affect all patches or the entire 707II. There are three pages with parameters. Use the [EDIT] key to switch between pages.
Parameters and Types Effect
■ PAGE 1
Parameter 1 | PATLVL | 1 – 30 |
Sets final patch level. A setting of 25 means that input signal and output signal levels are equal.
Parameter 2 Specifies input position.
Parameter 3 Selects a character.
Parameter knobs 2 and 3 let you input or edit a patch name. Knob 2 specifies the character input position, and knob 3 selects the alphanumeric character to be input at that position.
(Space) | |
(Space) ' ( ) * + | |
5 6 7 8 9 < = > ? @ A B C | |
D | E F G H I J K L M N O P |
Q | R S T U V W X Y Z \ |
■ PAGE 1
Parameter 1 | PTN | Pattern name |
Selects rhythm pattern to be assigned to a patch. For details on how to assign rhythm patterns to a patch, see p. 26.
Parameter 2 | PDLMIN | 0 – 10 |
Sets minimum parameter value when expression pedal is fully raised.
Parameter 3 | PDLMAX | 0 – 10 |
Sets maximum parameter value when expression pedal is fully lowered.
For details on how to set the pedal range for each patch, see p. 23.
■ PAGE 3
Parameter 1 | SP NO | 1 – 60 |
Selects a sample to assign to a patch. For details on how to assign a sample to a patch, see p. 27.
Parameter 2 | SPMODE | n1, n2, P2, n4, P4 | |
Selects the sample playback mode, as follows. | |||
• n1 | Normal speed playback |
| |
• n2 | Half tempo, half pitch playback |
| |
• P2 | Half tempo, normal pitch playback |
| |
• n4 | Quarter tempo, quarter pitch playback |
| |
• P4 | Quarter tempo, normal pitch playback |
| |
| SP LVL | 0 – 30 | |
Parameter 3 | |||
Adjusts sample playback level.