USAGE AND SAFETY PRECAUTIONS

USAGE

SAFETY PRECAUTIONS

 

 

 

 

 

 

 

AND

 

In this manual, symbols are used to highlight warnings and

 

cautions for you to read so that accidents can be prevented.

 

 

SAFETY

 

The meanings of these symbols are as follows:

 

 

This symbol indicates explanations

 

 

PRECAUTIONS

 

Warning

about extremely dangerous matters. If

 

users ignore this symbol and handle the

 

 

device the wrong way, serious injury or death could result.

This symbol indicates explanations about dangerous matters. If users ignore this Caution symbol and handle the device the wrong way, bodily injury and damage to the equipment

could result.

Please observe the following safety tips and precautions to ensure hazard-free use of the 707II.

• Power requirements

Since power consumption of this unit is fairly high, we

recommend the use of an AC adapter whenever possible. Warning When powering the unit from a battery, use only an alkaline

type.

[AC adapter operation]

•Be sure to use only an AC adapter which supplies 9 V DC, 300 mA and is equipped with a "center minus" plug (Zoom AD- 0006). The use of an adapter other than the specified type may damage the unit and pose a safety hazard.

•Connect the AC adapter only to an AC outlet that supplies the rated voltage required by the adapter.

•When disconnecting the AC adapter from the AC outlet, always grasp the adapter itself and do not pull at the cable.

•When not using the unit for an extended period, disconnect the AC adapter from the AC outlet.

•Extreme temperature

•High humidity or moisture

•Excessive dust or sand

•Excessive vibration or shock

•Handling

Since the 707II is a precision electronic device, avoid

Caution applying excessive force to the switches and buttons. Also take care not to drop the unit, and do not subject it to shock

or excessive pressure.

• Alterations

Never open the case of the 707II or attempt to modify the

product in any way since this can result in damage to the Caution unit.

•Connecting cables and input and output jacks

You should always turn off the power to the 707II and all

Caution other equipment before connecting or disconnecting any cables. Also make sure to disconnect all cables and the AC

adapter before moving the 707II.

Usage Precautions• Electrical interference

For safety considerations, the 707II has been designed to provide maximum protection against the emission of electromagnetic radiation from inside the device, and protection from external interference. However, equipment that is very susceptible to interference or that emits powerful electromagnetic waves should not be placed near the 707II, as the possibility of interference cannot be ruled out entirely.

With any type of digital control device, the 707II included, electromagnetic interference can cause malfunctioning and can corrupt or destroy data. Care should be taken to minimize the risk of damage.

[Battery operation]

•Use four conventional IEC R6 (size AA) batteries (alkaline).

•The 707II cannot be used for recharging.

Pay close attention to the labelling of the battery to make sure you choose the correct type.

•When not using the unit for an extended period, remove the batteries from the unit.

•If battery leakage has occurred, wipe the battery compartment and the battery terminals carefully to remove all remnants of battery fluid.

•While using the unit, the battery compartment cover should be closed.

• Cleaning

Use a soft, dry cloth to clean the 707II. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull the finish or damage the surface.

Please keep this manual in a convenient place for future reference.

• Environment

Avoid using your 707II in environments where it will be Caution exposed to:

2ZOOM 707II GUITAR