Rewind
Press both keys to return to the start of the sample
[W] foot switch | [Q] foot switch |
Play/Stop | Start sampling |
11.If you wish to set the loop end point, press the [A→B] key once more during loop playback of the sample.
The [A→B] LED now stays constantly lit, and the point at which you pressed the [A→B] key is taken as the loop end point.
When the end point has been set, loop playback is carried out between the start and end points.
Start point | End point |
|
|
When you operate parameter knob 3, the indication "SP LVL" appears on the display. The [BANK/PATCH] indicator shows the input signal level, using a range from 0 – 30. Adjust the level to obtain a suitable playback volume.
SP LVL 30
HINT
You can also adjust the playback level with the expression pedal.
10.To carry out loop playback of a specific interval, play the sample and press the [A→B] key at the desired start point.
The [A→B] LED flashes and loop playback is enabled. The point at which you pressed the [A→B] key is taken as the loop start point. If no end point has been set, the end of the sample is taken as the end point.
Start point
Playback
12.To cancel loop playback, press the [A→B] key once more (or change the sample number).
The [A→B] LED goes out, and the unit returns to normal
The unit returns to normal play mode.
NOTE
•The start point and end point settings are reset when you change the sample nunber or switch the sampler function off or on.
•The sampler function cannot be used together with the rhythm pattern function.
•While the sampler function is on, the MOD module and REV module cannot be used. (They are automatically set to OFF.)
•When sampling to a SmartMedia card, the sampled data are stored on the SmartMedia card automatically. There is no need for the user to perform any steps for storing.
Operation) Mode (Play Patches to Listening
ZOOM 707II GUITAR 15