Zoom 7072 POWER A0, 8BEAT, BPM120, LVL, Using the Rhythm Function

Using the Rhythm Function

The 707II incorporates 60 rhythm patterns which can be selected for playback. This is convenient for parts practice or a quick jam session.

Operation) Mode (Play Patches to Listening

1.Press the [R/P] key in play mode.

Rhythm pattern playback starts. The display shows the currently selected pattern, and the [BANK/PATCH] indicator briefly shows the pattern number. The [RHYTHM] LED flashes in sync with the rhythm pattern tempo.

POWER A0

2.Use parameter knobs 1 – 3 to control rhythm pattern play.

In play mode, parameter knobs 1 – 3 have the following functions.

Parameter knob 1

Changes the rhythm pattern type.

Parameter knob 2

Changes the rhythm pattern tempo.

Parameter knob 3 Changes the rhythm pattern volume.

When you operate a parameter knob during rhythm pattern play, the indication on the display and [BANK/PATCH] indicator changes temporarily.

8BEAT 1

Rhythm pattern name

Parameter knob 1

BPM120

Rhythm pattern tempo

Parameter knob 2

LVL 20

Rhythm pattern volume

Parameter knob 3

HINT

•You can also switch patches during rhythm pattern playback.

•You can also play a rhythm pattern in the bypass/mute condition and in the edit mode, but the parameter knobs cannot be used to control the rhythm pattern in this case.

•The rhythm pattern type, tempo, and volume settings revert to the default condition when the unit is turned off and on again.

•You can also use the TYPE [W]/[Q] keys to change the pattern type.

3.To stop rhythm pattern playback, press the [R/P] key once more.

It is also possible to store a rhythm pattern for specific patches. When you have assigned rhythm patterns to patches and you set the [PATCH SYNC] key to On, rhythm patterns will be switched together with the patches (→ p. 26).

16ZOOM 707II GUITAR

Contents

CONTENTS USAGE AND SAFETY PRECAUTIONS Introduction Controls and Functions Top Panel Rear Panel POWER Preparations Inserting Batteries and a SmartMedia card Getting Connected Quick Guide (Let's Play) 1In play mode, press one of the [W]/[Q] foot switches 2 To switch the effect module on or off, push the expression pedal Changing the sound of a patch 1While playing your instrument, operate the knobs on the panel WER A0 Storing an effect 1Press the [STORE/EXECUTE] key [DRIVE VARIATION] key [DRIVE] knob Parameter knob 3 Adjusts the reverb and echo level Listening to Patches (Play Mode Operation) Panel Display in Play Mode Selecting a Patch Using the Tuner Function 440HZ Using the Easy Edit Function Using the Sampler Function SAMPLE SP NO SPMODE N1 SP LVL Using the Rhythm Function POWER A0 8BEAT BPM120 LVL Rhythm pattern list Changing the Sound of a Patch (Edit Mode) Patch Configuration ZNR Basic Edit Mode Steps HALL PD TIME TONE MIX Storing and Swapping Patches STORE? E3 Other Functions Using the Hold Delay Function STOP ■If a numeric value is set as TIME parameter Effect sound Direct sound ■If TIME parameter is set to "Mn" and MODE parameter to "So Changing the Patch Call Method Using the Pedal to Control an Effect ●MOD ●GAIN ●REV ●VOL ●SAMPLER Adjusting the Expression Pedal Storing Rhythm Patterns and Samples as Part of a Patch 8.Press the [R/P] key 10.Switch the patch 11.To stop rhythm pattern playback, press the [R/P] key 12.Press the [PATCH SYNC] key so that the LED of the key is out Assigning a sample to a patch LOAD Utility mode functions Storing a single patch on a SmartMedia card 1.In play mode, select the patch from internal memory that you want to store 2.Activate utility mode and select "SAVE". Then press the [STORE/ EXECUTE] key 5.To carry out the operation, press the [STORE/EXECUTE] key once more Storing a group on a SmartMedia card 1.In utility mode, select "ALSAVE" and press the [STORE/EXECUTE] key 3.To carry out the operation, press the [STORE/EXECUTE] key once more Deleting a group from a 1.In utility mode, select "P DEL" and press the [STORE/EXECUTE] key 2.Use the TYPE [W]/[Q] keys to select the patch group (1 – 5) for deleting 3.Press the [STORE/EXECUTE] key 4.To carry out the operation, press the [STORE/EXECUTE] key once more All Initialize/Factory Recall Effect Types and Parameters BOOSTER Module ISOLATOR/COMP (Isolator/Compressor) Module DRIVE Module EQ (Equalizer) Module ZNR/D GATE (ZOOM Noise Reduction/D Gate) Module CABINET Module MODULATION Module TYPE 9 STEP 36ZOOM 707II GUITAR DLY/REV (Delay/Reverb) Module TOTAL Module Troubleshooting Specifications Patch List