Parameter 2

LOW G

-12 – 12

Parameter 3

LEVEL

1 – 8

Adjusts boost/cut in low range selected with LOW F.

Adjusts signal level after passing equalizer module.

 

ZNR/D GATE (ZOOM Noise Reduction/D Gate) Module

This module serves for cutting noise during play pauses. It offers a choice of noise reduction that lowers only noise and a noise gate that cuts the sound off completely.

TYPE 1 ZNR (ZOOM Noise Reduction)

The original noise reduction developed by ZOOM cuts noise during performance pauses without impairing the sound quality.

CABINET Module

Simulates the sound of a speaker cabinet.

TYPE 1 BOX

Simulates a small amp cabinet.

TYPE 2 Z BOX (ZOOM Box)

Simulates a cabinet with ZOOM's original sound character.

TYPE 3 BR CMB (Bright Combo)

Simulates a bright combo amp cabinet.

TYPE 4 CMB (Combo)

Simulates a conventional combo amp cabinet.

TYPE 2 D GATE

Vintage type noise gate with distinctive closure characteristics.

Parameter 1

1 – 8

Adjusts sensitivity. Set the value for maximum noise reduction without producing an unnatural cut of the instrument sound.

TYPE 5 CMB+EV (Combo + EV)

Simulates an EV speaker in a combo amp cabinet.

TYPE 6 STK (Stack)

Simulates a stack amp cabinet.

TYPE 7 STK+EV (Stack + EV)

Simulates an EV speaker in a stack amp cabinet.

* Parameters for TYPE 1 - 7 are the same.

Parameter 1

DEPTH

0 – 10

Adjusts the intensity of the cabinet effect.

MODULATION Module

This module contains modulation type effects such as chorus and flanger, effects that drastically change the sound such as wow, filter, and ring modulator, and pitch altering effects such as pitch shift and vibrato.

TYPE 1 CHORUS

Adds vibration and spaciousness to the sound.

Parameter 1

DEPTH

 

0 – 10

Adjusts modulation intensity.

 

 

 

RATE

 

1 – 30

Parameter 2

 

Adjusts modulation speed.

 

 

 

MIX

 

 

0 – 30

Parameter 3

 

 

 

 

Adjusts mixing balance of direct sound and effect sound.

TYPE 2 V-CHO (Vintage Chorus)

Simulates the warm sound of a vintage effect.

Parameter 1

DEPTH

 

0 – 10

Adjusts modulation intensity.

 

 

 

RATE

 

1 – 30

Parameter 2

 

 

Adjusts modulation speed.

 

 

 

MIX

 

0 – 30

Parameter 3

Adjusts mixing balance of direct sound and effect sound.

TYPE 3 FLANGE (Flanger)

Produces a unique, undulating sound.

Parameter 1

DEPTH

0

– 10

Adjusts modulation intensity.

 

 

 

 

RATE

 

 

1

– 30

Parameter 2

 

 

 

 

Adjusts modulation speed.

 

 

 

 

FB

-10

– 10

Parameter 3

Adjusts feedback ratio. Higher values in positive or negative direction result in stronger characteristics.

TYPE 4 PHASE (Phaser)

Produces a swooshing sound.

Parameter 1

POSI

AF, bF

Selects connection point of MOD module.

•AF: After CABINET module

•bF: Before DRIVE module

Parameter 2

RATE

1 – 30

Adjusts modulation speed.

Parameters and Types Effect

ZOOM 707II GUITAR 35