Using the Easy Edit Function
The 707II incorporates a function called "Easy Edit" that allows adjusting some effect parameters during play. This is done with the parameter knobs 1 – 3, the [DRIVE VARIATION] key, and the [DRIVE] knob on the front panel.
Mode (Play Patches to Listening
The parameters controlled by the knobs are as follows.
Parameter knob 1Adjusts the DRIVE module distortion amount.
Parameter knob 2
Adjusts a major parameter of the MOD module (such as chorus depth).
Parameter knob 3
Adjusts a major parameter of the REV module (such as echo or reverb amount).
The actual parameter controlled by parameter knobs 1 – 3 depends on the effect selected for the current effect module.
2.Use the [DRIVE] knob and [DRIVE VARIATION] key to select the effect to be used for the DRIVE module.
The effects of the DRIVE module can be directly selected with the [DRIVE] knob and [DRIVE VARIATION] key.
The [DRIVE] knob selects the general effect type (amp type or compact effect type), and the [DRIVE VARIATION] key selects one of several variations for that effect. Each push of the [DRIVE VARIATION] key cycles through the CLASSIC → STANDARD → MODERN settings, and the corresponding LED lights up.
LitOff (DRIVE module is off)
HINT
Operation)
When a knob is turned, the current setting of the relevant parameter is shown on the BANK/PATCH indicator, and a dot (.) appears at the "EDITED" position. This indicates that the parameter has been changed. If the parameter is returned to the original setting, the dot disappears.
24 |
| When a dot (.) is shown |
| here, the effect | |
| parameter has been | |
|
changed.
•For an explanation of DRIVE module effects, see p. 33.
•In play mode, you can also use the MODULE [E]/[R] keys to edit the PATLVL parameter (volume level for each patch).
3.To store an edited patch, carry out the steps for storing (→ p. 20).Note that if another patch is called up without storing the edited patch, the edited contents will be lost.
NOTE
While playing a rhythm pattern, the parameter knobs 1 – 3 adjust rhythm parameters.