Using the Tuner Function

The 707II incorporates an auto-chromatic tuner for guitar. To use the tuner function, the builtin effects must be bypassed (temporarily turned off) or muted (direct sound and effect sound turned off).

1.To set the 707II to the bypass (mute) condition, press and release both [W]/[Q] foot switches in play mode.

When you press and immediately release both foot switches, the 707II goes into bypass mode.

Release immediately

BYPASS **

While the 707II is in the bypass condition, all effects are off and only the direct sound is output. The expression pedal works as a volume pedal.

When you press and hold both foot switches for at least 1 second and then release them, the 707II goes into mute mode.

Press and release after at least 1 second

The note is shown on the left part of the indicator

A D G

A D G

B E

C F

C F

A8

Pitch is sharp Correct pitch Pitch is flat

The more the pitch is off, the faster the indicator rotates

To the right of the note, a symbol indicates by how much the tuning is off.

3.To change the reference pitch of the tuner, use the TYPE [W]/[Q] keys.

The current reference pitch is briefly shown on the display. The default setting after power-on is center A = 440 Hz.

Mode (Play Patches to Listening

MUTE **

While the 707II is in the mute condition, there is no sound output from the [OUTPUT/PHONES] jack.

2.Play the open string you want to tune.

The [BANK/PATCH] indicator shows the note which is closest to the current pitch. Tune your instrument until the note indication shows the desired note.

440HZ

Reference pitch value

4.While the reference pitch is shown, you can change the pitch by pressing the TYPE [W]/[Q] keys.

The available setting range is 435 – 445 Hz in 1-Hz steps. When the 707II is turned off and on again, it will be reset to 440 Hz.

5.Press one of the [W]/[Q] foot switches.

The 707II returns to the play mode.

Operation)

ZOOM 707II GUITAR 11