Zoom 7072 WER A0, Storing an effect, Changing the sound of a patch, 1Press the [STORE/EXECUTE] key, [DRIVE VARIATION] key [DRIVE] knob

Changing the sound of a patch1While playing your instrument, operate the knobs on the panel.

WER A0 Storing an effect1Press the [STORE/EXECUTE] key.

The 707II goes into store standby mode.

Each knob controls a certain parameter, as indicated below.

[DRIVE VARIATION] key [DRIVE] knob

Selects the distortion type for the DRIVE module.

Parameter knob 1

Adjusts the distortion level of the DRIVE module.

Parameter knob 2

Adjusts the modulation rate of chorus, flanger, and similar effects. For some patches, the knob adjusts the echo level.

Parameter knob 3 Adjusts the reverb and echo level.

◆For a list of parameters adjusted with the knobs, see p. 33 – 38.

◆To edit a patch more in detail, see p. 18.

Play) (Let's Guide Quick

A0

If a patch from the PRESET group was selected, "A0" in the USER group is automatically selected as store target.

2 Use the [W]/[Q] foot switches to select the store target bank and patch number.

3To carry out the store operation, press the [STORE/EXECUTE] key once more.

To cancel the process, press the [CANCEL/ EXIT] key.

◆For a detailed explanation of patch storing, see p. 20.

◆For information on how to return the USER group patches to the factory default condition, see p. 32.

ZOOM 707II GUITAR 9