HALL PD

Effect type

Shown if selected effect can

 

be controlled by pedal

NOTE

Because the ISOLATOR, EQ, and TOTAL modules have many parameters, settings are divided into several pages. To switch the page, press the [EDIT] key while the corresponding module LED is lit.

4.To switch the on/off status of the selected module, press both MODULE [E]/[R] keys together.

When you change the module on/off status, effect type selection, or a parameter value, a dot

(.)appears at the "EDITED" position of the [BANK/PATCH] indicator. When this dot is shown in edit mode, it means that the currently selected module has been edited. If you return the module to the original setting, the dot disappears.

24

 

When a dot (.) is

 

shown here, the

 

 

 

 

currently selected

 

 

module was edited.

 

 

5.To change the effect type of the currently selected module, press one of the TYPE [W]/[Q] keys.

6.To change a parameter setting, use the parameter knobs 1 – 3.

Parameter knobs 1 – 3 serve for adjusting three parameters of the currently selected module. When you operate a knob, the display shows the parameter name, and the [BANK/PATCH] indicator shows the current setting value.

For example, if the effect type ROOM is selected for the REV module, parameter knobs 1 – 3 control the following parameters.

Parameter knob 1: TIMEParameter knob 2: TONEParameter knob 3: MIX

7.If you want to check the current setting without moving the parameter knob, press the TYPE [W]/[Q] keys together. With each push of the two keys, the names of parameters 1 – 3 and the respective settings are shown.

TIME

20

First push

 

TONE

10

Second push

 

MIX

7

Third push

8.To directly switch the effect type of the DRIVE module, use the [DRIVE] knob and [DRIVE VARIATION] key.

As in play mode, the [DRIVE] knob and [DRIVE VARIATION] key directly control the effect type of the DRIVE module.

9.Repeat steps 3 – 8 to edit other modules.10.When editing is completed, press the [PLAY] key or the [CANCEL/EXIT] key.

The 707II returns to the play mode. A dot (.) appears at the "EDITED" position of the [BANK/PATCH] indicator if any aspect of the patch has been edited.

NOTE

If you wish to keep the patch, be sure to perform the store operation. Otherwise all changes will be permanently lost as soon as you switch to another patch. (P. 20)

Mode) (Edit Patch a of Sound the Changing

ZOOM 707II GUITAR 19