Preparations
Inserting Batteries and a SmartMedia card
When wishing to power the 707II from batteries, insert them as shown below. When wishing to store patch data or sample data on a SmartMedia card, insert the card as shown below.
Preparations
2.Insert four fresh IEC R6 (size AA) batteries into the battery compartment. The use of alkaline batteries is recommended.
The correct battery orientation is indicated inside the battery compartment.
Four IEC R6 
(size AA) batteries 
SmartMedia card
3.To store patch and sample data, insert a SmartMedia card into the card slot, as shown above.
●If the card is inserted upside down or with wrong orientation, it does not go all the way in. Do not try to force the card in, because this will damage the card.
●Never insert or remove the SmartMedia card while power to the unit is turned on. Otherwise all data on the card may be lost.
●Standard SmartMedia cards (designed for 3.3V) with a capacity from 16 – 128 MB can be used.
●When wishing to use a SmartMedia card that has been formatted in other equipment such as a computer or digital camera, you must format the card again in the 707II, as described on page 31.
●To store the contents of a SmartMedia card in a computer, a SmartMedia card reader/writer is required.
4.Close the battery compartment cover.
NOTE 
•If the indication "BATT" appears on the display, the batteries are exhausted. Replace the batteries as soon as possible.
PATCH NAME
•When not using the unit for an extended period, remove the batteries to prevent the possibility of damage by leaking battery fluid.