3.To carry out the operation, press the [STORE/EXECUTE] key once more.

The formatting process starts. When the process is completed, the unit reverts to play mode.

If you press the [CANCEL/EXIT] key instead of the [STORE/EXECUTE] key, the formatting operation is canceled.

NOTE

Formatting erases all data that may be present on the SmartMedia card. Take care not to accidentally format a card which already contains data that you want to keep.

SmartMedia card error messages

While using a SmartMedia card, one of the following error indications may appear. The meaning is explained below.

●[SMART MEDIA] LED does not light

A SmartMedia card with a capacity of less than 8 MB may have been inserted.

●ERROR

•The card was removed or inserted (during sampler operation).

•The card was removed (in utility mode).

●WP ERR

A write protect seal is attached to the SmartMedia card. This prevents writing to the card.

●FULL

There is not enough free capacity on the SmartMedia card.

●NODATA

•There are no sampler data (during sampler operation).

•There are no patch data or sampler data (in utility mode).

●NO USR

Loading cannot be performed, because the load target is not the USER group (in utility mode).

●NO CARD

SmartMedia card is not inserted.

●CD ERR

The card is defective, not inserted correctly, or not properly formatted.

Functions Other

All Initialize/Factory Recall

The patches in the USER group can be returned to the original condition at any time, even if you have changed them.

The All Initialize function returns all patches in the USER group to the default condition. Factory Recall can be used to reset only specific patches in the USER group to the default settings.

1.Turn power to the 707II on while pressing the [STORE/EXECUTE] key.

The indication "ALINIT" appears on the display.

●To perform All Initialize, proceed to step 2.

●To perform Factory Recall, use the TYPE [W]/[Q] keys and [W]/[Q] foot switches to select the patch that you want to return to the factory default condition. (The bank and patch number are shown on the [BANK/PATCH] indicator.)

2.Press the [STORE/EXECUTE] key once more.

All Initialize or Factory Recall is carried out. If All Initialize was carried out, the unit automatically returns to the play mode.

The contents of patches stored by the user will be lost when the defaults are restored. To cancel All Initialize/Factory Recall, press the [CANCEL/EXIT] key before step 2.

32ZOOM 707II GUITAR