Manuals / Brands / Musical Instruments & Equipment / Guitar / Zoom / Musical Instruments & Equipment / Guitar

Zoom 7072 10.Switch the patch, 8.Press the [R/P] key, 4.Press the [EDIT] key twice, Assigning a sample to a patch

1 40

Download 40 pages, 907.06 Kb

8.Press the [R/P] key.

The rhythm pattern of the patch selected in step 7 starts to play. (If an intro type pattern has been assigned, playback starts when the patch is switched in step 7.)

9.If necessary, use parameter knobs 2 and 3 to adjust the tempo and volume of the pattern.

Also when the [PATCH SYNC] key is ON, parameter knobs 2 and 3 can be used to adjust the tempo and volume for all patterns. (If desired, you can also use parameter knob 1 to switch to manual operation of the pattern.)

10.Switch the patch.

When you switch the patch while a rhythm pattern is playing, the pattern continues to play until the end of the current measure and then switches to the pattern that is assigned to the new patch.

Switch to pattern of patch B

Rhythm	Pattern of	Pattern of		Pattern of	Pattern of
pattern	patch A	patch A		patch B	patch B
Patch	Patch A		Patch B

Switch to patch B

Switch to other patches in the same way.

11.To stop rhythm pattern playback, press the [R/P] key.

If an ending pattern is assigned to a patch, the pattern will play when switching to the patch, and then stop.

12.Press the [PATCH SYNC] key so that the LED of the key is out.

Assigning a sample to a patch

By assigning a sample stored on SmartMedia card to a patch, you can have the sample play every time you select the patch.

1.Insert the SmartMedia card into the 707II and sample the phrase or source material that you want to use.

2.In play mode, select the patch to which you want to assign a sample, and press the [EDIT] key.

3.Use the MODULE [E]/[R] keys to select the TOTAL module.

The "PATLVL" (patch level) parameter appears on the display.

4.Press the [EDIT] key twice.

The [EDIT] key lights up in orange. You can now use parameter knobs 1 – 3 to control the following functions.

Lit

Parameter knob 1 Selects the number of the sample on the SmartMedia card.

Parameter knob 2

Selects the sample playback method (n1, n2, P2, n4, P4).

Parameter knob 3

Sets the sample playback level (0 – 30).

HINT

For details regarding playback mode, see p. 14.

5.Use parameter knobs 1 – 3 to select the sample number, playback method, and playback level.

Functions Other

ZOOM 707II GUITAR 27

Contents

CONTENTS USAGE AND SAFETY PRECAUTIONS Introduction Controls and Functions Top Panel Rear Panel POWER Preparations Inserting Batteries and a SmartMedia card Getting Connected Quick Guide (Let's Play) 1In play mode, press one of the [W]/[Q] foot switches 2 To switch the effect module on or off, push the expression pedal Changing the sound of a patch 1While playing your instrument, operate the knobs on the panel WER A0 Storing an effect 1Press the [STORE/EXECUTE] key [DRIVE VARIATION] key [DRIVE] knob Parameter knob 3 Adjusts the reverb and echo level Listening to Patches (Play Mode Operation) Panel Display in Play Mode Selecting a Patch Using the Tuner Function 440HZ Using the Easy Edit Function Using the Sampler Function SAMPLE SP NO SPMODE N1 SP LVL Using the Rhythm Function POWER A0 8BEAT BPM120 LVL Rhythm pattern list Changing the Sound of a Patch (Edit Mode) Patch Configuration ZNR Basic Edit Mode Steps HALL PD TIME TONE MIX Storing and Swapping Patches STORE? E3 Other Functions Using the Hold Delay Function STOP ■If a numeric value is set as TIME parameter Effect sound Direct sound ■If TIME parameter is set to "Mn" and MODE parameter to "So Changing the Patch Call Method Using the Pedal to Control an Effect ●MOD ●GAIN ●REV ●VOL ●SAMPLER Adjusting the Expression Pedal Storing Rhythm Patterns and Samples as Part of a Patch 8.Press the [R/P] key 10.Switch the patch 11.To stop rhythm pattern playback, press the [R/P] key 12.Press the [PATCH SYNC] key so that the LED of the key is out Assigning a sample to a patch LOAD Utility mode functions Storing a single patch on a SmartMedia card 1.In play mode, select the patch from internal memory that you want to store 2.Activate utility mode and select "SAVE". Then press the [STORE/ EXECUTE] key 5.To carry out the operation, press the [STORE/EXECUTE] key once more Storing a group on a SmartMedia card 1.In utility mode, select "ALSAVE" and press the [STORE/EXECUTE] key 3.To carry out the operation, press the [STORE/EXECUTE] key once more Deleting a group from a 1.In utility mode, select "P DEL" and press the [STORE/EXECUTE] key 2.Use the TYPE [W]/[Q] keys to select the patch group (1 – 5) for deleting 3.Press the [STORE/EXECUTE] key 4.To carry out the operation, press the [STORE/EXECUTE] key once more All Initialize/Factory Recall Effect Types and Parameters BOOSTER Module ISOLATOR/COMP (Isolator/Compressor) Module DRIVE Module EQ (Equalizer) Module ZNR/D GATE (ZOOM Noise Reduction/D Gate) Module CABINET Module MODULATION Module TYPE 9 STEP 36ZOOM 707II GUITAR DLY/REV (Delay/Reverb) Module TOTAL Module Troubleshooting Specifications Patch List