Using the Sampler Function
The 707II incorporates a sampler function that allows recording the input signal in the internal memory or on a SmartMedia card.
This can be used to record a phrase from the guitar connected to the [INPUT] jack or the sound from an external source such as a CD player connected to the [AUX IN] jack. When using the internal memory, the maximum recording duration is 6 seconds (1 sample). When using a 16 MB SmartMedia card, up to 4 minutes (maximum 60 samples) can be recorded. A recorded phrase can also be played at slower speed without changing the pitch. This is convenient to copy a
For playing a sample, you can choose between two modes:
1.When wishing to use a SmartMedia card, turn power to the 707II off, insert the SmartMedia card into the card slot, and then turn power on again. (For information on inserting a SmartMedia card, see p. 6.)
NOTE
•Before using a SmartMedia card in the 707II, it must be formatted (→ p.31).
•Never insert or remove the SmartMedia card while power to the unit is turned on. Otherwise all data on the card may be lost.
2.Connect the input source to the [INPUT] jack or [AUX IN] jack.GuitarINPUT
CD player | AUX IN |
For patches in which the expression pedal is assigned to SAMPLER, the sampler function
can also be turned on by pushing the pedal all the way down (→ p.24).
The subsequent steps are slightly different, depending on whether a SmartMedia card is inserted or not.
SmartMedia card not insertedThe following indication appears on the display, and the unit goes into the sampler standby mode. Proceed to step 4.
SAMPLE
SmartMedia card insertedThe following indication appears on the display, and the unit goes into the sampler standby mode. The sample number is shown on the [BANK/PATCH] indicator.
SP NO 1
When using a SmartMedia card, the samples on the card are assigned numbers from 1 – 60. If necessary, use parameter knob 1 to select a number. Then proceed to step 4.
Operation) Mode (Play Patches to Listening
ZOOM 707II GUITAR 13