Zoom Connecting the PC and the IG-4160, For cable and DSL modems, For dial-up and Isdn modems

1.5 Connecting the PC and the IG-4160

The diagram below shows what your completed setup will look like.

RF (COAXIAL) OR

PHONE LINE

CONNECTION

M ODEM

IG -4160

CABLE/DSL M ODEM	ETHERNET CABLE	Adm in PC
ETHERNET	(LAN)
(W AN) CABLE
or
DIAL-UP/ISDN M ODEM
SERIAL (COM PORT) CABLE

A	Be sure you’ve completed the pre-installation checklist on
	page 8.
	Shut off your computer and turn off your modem. Don’t
	plug the Gateway in yet.
B	For cable and DSL modems:
	Unplug the Ethernet cable from your PC and plug it into
	the WAN port on the back of the Gateway. Don’t unplug
	the Ethernet cable plugged into the modem.
	For dial-up and ISDN modems:
	Unplug the serial cable from the PC and plug it into the
	COM port on the back of the Gateway. Don’t unplug the
	serial cable plugged into the modem.
C	Using the Ethernet cable supplied with the Gateway, plug
	one end into a LAN port (labeled 1 and 2) on the back of
	the Gateway and plug the other end into the PC.

Chapter 1: Getting Started 9