27.2.4 SSH
You can use an SSH client program to access the switch. The following figure shows an example using a
Figure 93 SSH Login Example
C:\>ssh2 admin@192.168.1.1
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now
Please contact your system administrator.
Add correct host key to "C:/Documents and Settings/Administrator/Application Data/SSH/hostkeys/key_22_192.168.1.1.pub" to get rid of this message. Received server key's fingerprint:
on the keyfile. Agent forwarding is disabled to avoid attacks by corrupted servers. X11 forwarding is disabled to avoid attacks by corrupted servers. Are you sure you want to continue connecting (yes/no)? yes
Do you want to change the host key on disk (yes/no)? yes
Agent forwarding
X11 forwarding
Host key saved to C:/Documents and Settings/Administrator/Application Data/ SSH/hostkeys/key_22_192.168.1.1.pub host key for 192.168.1.1, accepted by Administrator Thu May 12 2005 09:52:21
admin's password: Authentication successful.
Copyright (c) 1994 - 2005 ZyXEL Communications Corp. ras>
27.3 The Login Screen
After you have successfully established a connection to the switch using a direct console connection or Telnet, a login screen displays as shown below. For your first login, enter the default administrator login username “admin” and password “1234”.
Figure 94 CLI LoginEnter User Name : admin
Enter Password : XXXX
Chapter 27 Introducing the Commands | 151 |