where
Enables port mirroring on the interface.
<ingressegressboth> = Enables port mirroring for incoming, outgoing or both incoming and outgoing traffic.
Port mirroring copies traffic from one or all ports to another or all ports for external analysis.
An example is shown next.
•Enable port mirroring.
•Enable the monitor port three.
•Enable ports one, four, five and six for configuration.
•Enable port mirroring on the ports.
•Enable port mirroring for outgoing traffic. Traffic is copied from ports one, four, five and six to port three in order to examine it in more detail without interfering with the traffic flow on the original port(s).
Figure 122 mirror Command Example
ras(config)#
28.10.5 gvrp
Syntax:
gvrp
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for switches to register necessary VLAN members on ports across the network. Enable this function to permit VLANs groups beyond the local switch.
An example is shown next.
•Enable the IEEE 802.1Q tagged VLAN command to configure tagged VLAN for the switch.
•Enable ports one, three, four and five for configuration.
•Enable GVRP on the interface.
Chapter 28 Command Examples | 183 |