Figure 27 System Info
The following table describes the labels in this screen.
Table 8 System Info
LABEL | DESCRIPTION |
|
|
System Name | This field displays the descriptive name of the switch for identification purposes. |
|
|
ZyNOS F/W | This field displays the version number of the switch 's current firmware including the |
Version | date created. |
Ethernet | This field refers to the Ethernet MAC (Media Access Control) address of the switch. |
Address |
|
Hardware Monitor (The following hardware monitoring information is only available on the ES- | |
2108PWR.) |
|
Temperature | The switch has temperature sensors that are capable of detecting and reporting if the |
Unit | temperature rises above the threshold. You may choose the temperature unit |
| (Centigrade or Fahrenheit) in this field. |
Temperature | CPU, MACand LOCAL refer to the location of the temperature sensors on the switch |
| printed circuit board. |
Current | This field displays the current temperature measured at this sensor. |
|
|
MAX | This field displays the maximum temperature measured at this sensor. |
|
|
MIN | This field displays the minimum temperature measured at this sensor. |
|
|
Threshold | This field displays the upper temperature limit at this sensor. |
|
|
Status | This field displays Normal for temperatures below the threshold and Error for those |
| above. |
62 | Chapter 7 Basic Setting |