ES-2108 Series User’s Guide

An example is shown next.

•Enable port one for configuration.

•Enable broadcast control.

•Set the broadband packet traffic the interface receives per second.

Figure 120 broadcast-limit Command Example

ras(config)# interface port-channel 1 ras(config-interface)# bmstorm-limit ras(config-interface)# bmstorm-limit 21

28.10.3 bandwidth-limit

Syntax:

bandwidth-limit bandwidth-limit egress <Kbps> bandwidth-limit ingress <Kbps>

where

 

 

 

<Mbps>

Enables bandwidth control on the switch.

 

) or

Sets the maximum bandwidth allowed for outgoing traffic (

egress

 

incoming traffic (ingress) on the switch.

 

 

 

 

An example is shown next.

•Enable port one for configuration.

•Enable bandwidth control.

•Set the outgoing traffic bandwidth limit to 70Kbps.

•Set the incoming traffic bandwidth limit to 90Kbps.

Figure 121 bandwidth-limit Command Example

ras(config)# interface port-channel 1 ras(config-interface)# bandwidth-limit ras(config-interface)# bandwidth-limit egress 70 ras(config-interface)# bandwidth-limit ingress 90

28.10.4 mirror

Syntax:

mirror

mirror dir <ingressegressboth>

182

Chapter 28 Command Examples