ES-2108 Series User’s Guide

The following table describes the labels in this screen.

Table 11 IP Setup

LABEL

DESCRIPTION

 

 

Domain

DNS (Domain Name System) is for mapping a domain name to its corresponding IP

Name Server

address and vice versa. Enter a domain name server IP address in order to be able to

 

use a domain name instead of an IP address.

Default

 

Management

Configure the fields to set the default management IP address.

IP Address

 

DHCP Client

Select this option if you have a DHCP server that can assign the switch an IP address

 

and subnet mask, a default gateway IP address and a domain name server IP address.

Static IP

Select this option if you don't have a DHCP server or if you wish to assign static IP

Address

address information to the switch. You need to fill in the following fields when you select

 

this option.

IP

Enter the IP address of your switch in dotted decimal notation for example 192.168.1.1.

Address

 

IP Subnet

Enter the IP subnet mask of your switch in dotted decimal notation for example

Mask

255.255.255.0.

Default

Enter the IP address of the default outgoing gateway in dotted decimal notation, for

Gateway

example 192.168.1.254

VID

Enter the VLAN identification number associated with the switch IP address. This is the

 

VLAN ID of the CPU and is used for management only. The default is "1". All ports, by

 

default, are fixed members of this "management VLAN" in order to manage the device

 

from any port. If a port is not a member of this VLAN, then users on that port cannot

 

access the device. To access the switch make sure the port that you are connected to is

 

a member of Management VLAN.

Apply

Click Apply to save the settings.

 

 

Cancel

Click Cancel to reset the fields to your previous configuration.

 

 

Management

Configure the fields to set additional management IP address.

IP Addresses

 

IP Address

Enter the IP address for managing the switch by the members of the VLAN specified in

 

the VID field below.

IP Subnet

Enter the IP subnet mask in dotted decimal notation. For example, 255.255.255.0.

Mask

 

VID

Enter the VLAN identification number.

 

 

Add

Click Add to save the new rule to the switch. It then displays in the summary table at the

 

bottom of the screen.

Cancel

Click Cancel to reset the fields to your previous configuration.

 

 

Index

This field displays the index number of an entry.

 

 

IP Address

This field displays the management IP address of the switch.

 

 

Subnet Mask

This field displays the subnet mask of the switch.

 

 

VID

This field displays the VLAN identification number of the network.

 

 

Delete

Click Delete to remove the selected entry from the summary table.

 

 

Cancel

Click Cancel to clear the Delete check boxes.

 

 

Chapter 7 Basic Setting

69