28.2.2 show ip
Syntax:
show ip
This command displays the IP related information (such as IP address and subnet mask) on all switch interfaces.
The following figure shows the default interface settings.
Figure 102 show ip Command Example
ras> show ip IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1]
ras>
28.2.3 show logging
Note: This command is not available in User mode.
Syntax:
show logging
This command displays the system logs. The following figure shows an example.
172 | Chapter 28 Command Examples |