ES-2108 Series User’s Guide

[ttl <1-255>]

=

Specifies the Time To Live (TTL) period.

[wait <1-60>]

=

Specifies the time period to wait.

[quesries <1-10>]

=

Specifies how many tries the switch performs the traceroute

 

 

function.

This command displays information about the route to an Ethernet device. The following example displays route information to an Ethernet device with an IP address of 192.168.1.100.

Figure 107 traceroute Command Example

ras> traceroute 192.168.1.100

traceroute to 192.168.1.100, 30 hops max, 40 byte packet 1:192.168.1.100 (10 ms) (10 ms) (0 ms)

traceroute done:

28.5 Enabling RSTP

To enable RSTP on a port. Enter spanning-treefollowed by the port number and press

[ENTER].

The following example enables RSTP on port 10.

Figure 108 Enable RSTP Command Example

ras(config)# spanning-tree 10 ras#

28.6 Configuration File Maintenance

The following sections shows how to manage the configuration files.

28.6.1 Restarting the Switch

There are two ways in which you can restart the switch: restart the switch (cold reboot) and restart the system (warm reboot).

Use the boot config command to restart the switch. The following figure shows an example.

176

Chapter 28 Command Examples