ES-2108 Series User’s Guide

Figure 13 Installed Transceiver

3.1.3.2 Transceiver Removal

Use the following steps to remove a mini GBIC transceiver (SFP module).

1Open the transceiver’s latch (latch styles vary).

Figure 14 Opening the Transceiver’s Latch Example

2Pull the transceiver out of the slot.

Figure 15 Transceiver Removal Example

3.1.4 100 Base-FX Fiber-Optic Port

This 100 Base-FX fiber-optic port is only available on the ES-2108-LC.

Note: To avoid possible eye injury, do not look directly into a module’s fiber-optic connectors. Keep the dust cover on a fiber-optic module until you connect it.

You may need to clean the fiber-optic cable’s connectors with a cotton swab dipped in alcohol.

•Type: Fiber-optic

•Wavelength: 1310 +/- 50 nm

•Multi-mode

•Dual LC connectors

•Connection distance: Up to 2km

40

Chapter 3 Hardware Overview