IES 1248 Support Notes
1.2 Set up IGMP Filtering
If we don’t set up IGMP filtering, the subscriber will receive all the movies. We set up a IGMP filter Profile and apply it to specific port to limit the channels subscriber can see. Click Basic Setting, xDSL Profiles Setup in the navigation panel to display
configuration screen as shown. And click the IGMP Filter Profile to show the setup page.
In this case we only allow the subscriber to join movie 1 and movie 2. That means only the groups 240.10.10.8 and 240.10.10.9 can be forwarded this subscribed port.
After create this profile, there is a new profile added in the list.
Then we need to apply the profile to port 1. Click Basic Setting, xDSL Profiles
Setup in the navigation panel to display configuration screen as shown. Click the port index 1 to set up this port.
39
All contents copyright (c) 2006 ZyXEL Communications Corporation.
