IES 1248 Support Notes
1.3 Port Isolation
If we just want to isolate ports of IES-1248 and don’t want to set any VLAN, there is another easy way to do this. Click Basic setting, Switch Setup in navigation panel
to display configuration screen as shown. Check Port isolation Active check box.
2. Prestige 660R-61 Settings
Please refer to the procedures in previous application.
Triple play Application
The IES-1248 allows you to use different channels(also called Permanent Virtual Circuits or PVCs) for different services. Define channels on each DSL port for different services and assign each channel a priority, a VLAN and ATM Quality of Service (QoS). The ATM QoS allows you to regulate the average rate and fluctuations of data transmission. This helps eliminate congestion to allow transmission of real time data (such as audio and video).
14
All contents copyright (c) 2006 ZyXEL Communications Corporation.
